Analysis of Tempe Tofu Home Industry Standards on Occupational Safety Health (K3) Aspects in Purwodadi Village, Kuala Pesisir District, Naga Raya Regency
DOI:
10.54443/morfai.v2i2.310Published:
2022-07-31Downloads
Abstract
Tofu and tempeh are foods derived from a variety of processed soybeans which have been famous foods among the public for a long time because the tariffs are relatively affordable and widely consumed by the public from various groups. Its existence has long been known and recognized as a healthy and nutritious food. A micro and macro industrial business must have K3 guidelines and K3 standards, although micro-enterprises such as tempeh tofu must also have standards that have been set Industrial work standards which refer to the K3 Law regarding K3 standards. This study focuses on analyzing the standards of the tempeh tofu home industry on occupational safety health (K3) aspects in Purwodadi village, Kuala Pesisir district, Naga Raya regency. This research describes a qualitative type of research. The sample in the study consisted of 14 informants accumulatively broken down from 7 main informants and 7 transmission informants. The measuring equipment used is in the form of literature studies, observations and interview guidelines. The data were analyzed using qualitative analysis whose results were presented in the form of a narrative( descriptive). The results of the study showed that applying assessment standards to buildings has not met the qualifications of businessworthy buildings. Conclusions of the study; each business is required to apply home industry standards and K3 aspects so that work productivity is good and guaranteed from work accidents.
Keywords:
K3 Aspects Home Industry Standards Tofu And TempehReferences
Aji Santoso, R., Nyoman Ruja, I., Purnomo, A., Pramesthi, R., & Maulidiyah Azzahroh, P. (2021). Social changes in fishing communities in Cupel Village, Negara District, Jembrana Regency. Journal of Integration And Innovative Harmony Of The Social Sciences, 1(8), 915–926. https://doi.org/10.17977/um063v1i82021p915-926.
Cookson, M. D., & Stirk, P.M. R. (2019). Industrial Sanitation K3, issue 3 2018, 256.
Fadhilah, N., Suryanto, & Ulfah, N. (2013). Factors Affecting Work Accidents in the Die Casting Process at PT. X Cikarang Barat Regency Bekasi West Java. Journal of Kesmasindo, 6(2), 135–142.
Faishol, M., Hastuti, S., Ulya Agricultural Industry Technology Study Program, Faculty of Agriculture UTM Correspondence, M., & Raya Telang Kamal Bangkalan, J. (2013). Redesigning the Layout of the Srikandi Junok Bangkalan Tofu Factory Production Facility. Agrotechnology, 7(2), 57.
Faridah, R., Fatoni, R., & Wicaksono, I. (2020). K3 Aspect Analysis and Redesign of tofu Industry Layout in Sragen Regency. Proceedings of The URECOL, 106–116.
Fridayanti, N., & Kusumasmoro, R. (2016). Application of Occupational Safety and Health at PT Ferron Par Pharmaceuticals Bekasi. Journal of Office Administration, 4(1), 211–234.
Judge, L., & Subekti, P. (2015). Design a Mini Steam Boiler With A Standard Approach To Palm Shell Burning. Aptek, 7(1), 1–8.
INDONESIA, P. P. R. (2021). Government Regulation of the Republic of Indonesia Number 57 concerning National Education Standards. National Standards of Education, 102501, 1–49. https://jdih.kemdikbud.go.id/arsip/Salinan PP Number 57 of 2021.pdf.
Juniani, A. I., Handoko, L., & Firmansyah, C. A. (n.d.). Implementation of the HazOp Method (Hazard and Operability Study) In the Process of Hazard Identification and Risk Analysis Pad .
Kotek, L., & Tabas, M. (2012). HAZOP study with qualitative risk analysis for prioritization of corrective and preventive actions. Procedia Engineering, 42(August), 808–815. https://doi.org/10.1016/j.proeng.2012.07.473.
Li et al., 2019. (n.d.). No Title. SAFETY AND HEALTH ANALYSIS FOR WORKERS AT THE MOJOSONGO TOFU PLANT.
Midayanto, D. N., & Yuwono, S. S. (2014). AS AN ADDITIONAL CONDITION IN THE INDONESIAN NATIONAL STANDARD Determination of Quality Attribute of TofuTexture to be Recommended as an Additional Requirement in Indonesian National Standard. Food And Agroindustry, 2(4), 259–267.Mikro, I., & Kecil, D. A. N. (2013). I ndeks Produksi Triwulanan.
Nur, M. (2019). ANALYSIS OF WORK ACCIDENTS USING THE HAZARD AND OPERABILITY STUDY (HAZOP) METHOD (Case Study: PT. XYZ). Journal of Integrated Industrial Engineering, 2(2), 30–37. https://doi.org/10.31004/jutin.v2i2.480.
Prasetyo, A. E. (2019). The Relationship between K3 Knowledge Level and Attitude Towards the Use of Personal Protective Equipment (PPE) on Workers at the Iron Pande Industrial Center, Padas Village, Karanganom District, Klaten Regency. Faculty of Health Sciences, University of Muhammadiyah Surakarta.
President of the Republic of Indonesia, P. R. I. (2014). Law No. 3 of 2014 concerning Industry. In Cell (Vol. 3, Issue 4, pp. 1–15).
Son, P. P. (2017). Application of Occupational Safety and Health Inspections as an Effort to Prevent Occupational Accidents. Higeia Journal of Public Health Research and Development,1(3), 84–94. https://journal.unnes.ac.id/sju/index.php/higeia/article/view/15976
Ridlo, M. S. (2019). Efforts to Improve K3 Culture in the Sambi Village Community, Boyolali Regency. 1–4.Rizqi Septiana, N., Widowati Kesehatan dan Keselamatan Kerja, E., Ilmu Kesehatan Masyarakat, J., & Ilmu KeolahragaanUniversitas Negeri Semarang, F. (2017). 73 Higeia 1 (1) (2017) Gangguan Pendengaran Akibat Bising. 1(1), 73–82. http://journal.unnes.ac.id/sju/index.php/higeia.
Rozenfeld, O., Sacks, R., Rosenfeld, Y., & Baum, H. (2010). Construction Job Safety Analysis. Safety Science, 48(4), 491–498. https://doi.org/10.1016/j.ssci.2009.12.017.
Sayow, F., Polii, B. V. J., Tilaar, W., & Augustine, K. D. (2020). Analysis of Tofu and Tempe Rahayu Industrial Waste Content in Uner Village, Kawangkoan District, Minahasa Regency.Agri-Socioeconomics,16(2),245.https://doi.org/10.35791/agrsosek.16.2.2020.28758
Susanto, H., Yanto, J., & Wahyudin, W. (2020). Design of Traditional Tofu Cutting Tools for Home Industry in Nagan Raya Regency. Mekanova's Journal: Mechanical, Innovation And Technology, 6(1), 20. https://doi.org/10.35308/jmkn.v6i1.2211.
Tandian, F. R., & Praptiningsih, M. (2013). Management and Development of Tofu Production Business at Ud Family Company.Tofu Saudara Factory In Surabaya. Agora, 1(2), 1–6.
Upy, J. I. E., Health, A., Pada, O., Work, A., Production, L., Lebu, C. V, & Jaya, B. (2021). Jie.upy. 1(1), 17–22.
UTARI, N. F. (2019). Safety And Health Analysis For Workers In Mojosongo Tofu Factory. 1–10.
Waruwu, S., & Yuamita, F. (2016). Analysis of Occupational Health and Safety (K3) Factors That Significantly Affect Work Accidents In The Student Castle Apartment Construction Project. Industrial Spectrum, 14(1), 63. https://doi.org/10.12928/si.v14i1.3705.
Widaningrum, I. (2015). Environmentally Friendly (Waste-Free) Tofu Making Technology. Journal of Dedication, 14–21
License
Copyright (c) 2022 Muhammad Rizqi, Zakiyuddin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Downloads
How to Cite
